Vibrating Line Road Marking Machine
1.Name: Vibrating line road marking machine 2.Function: Do vibrating line marking jobs 3.Parameters: 4.Product Details: Vibrating thermoplastic lines is a kind of lines whose baseline usually is 2-3mm and the bulge height is 3-7mm. When vehicles go through vibrating thermoplastic lines, the...
1.Name: Vibrating line road marking machine
2.Function: Do vibrating line marking jobs
1400 X1100 X1100mm
Total weight of machine
Capacity of glass beads case
Weight of paints to be melted
Diesel engine power
HONDA gasoline engine of 5.5HP
Hydraulic continuously variable transmission
>400m/h（depending on paint condition, baseline thickness and bulge thickness）
1-10mm（depending on the quality of paint）
1-999mm error range ±5mm
1-999mm error range ±5mm
Glass beads dispense method
Flexible shaft driven, automatically clutch, fine adjustment dispense amount
liquefied petroleum gas
Vibrating thermoplastic lines is a kind of lines whose baseline usually is 2-3mm and the bulge height is 3-7mm. When vehicles go through vibrating thermoplastic lines, the steering wheel would vibrate slightly and the friction between wheels and lines would make noise to force driving speed reduction or remind tired and distracted drivers to drive within vehicle lanes, thus enhances driving safety. On the other hand, vibrating thermoplastic lines possesses better reflective effect than common thermoplastic lines and normal temperature lines at rainy nights. According to fact statistics, the accident rate can decrease by 40% on the maintenance section after the vibrating lines are adopted.
1. Q: Can this machine preheat the thermoplastic paint?
A: No. It needs to work with a preheater, like the last picture. The TW-V just can preserve the heat of thermoplastic paint.
2. Q: Do you have thermoplastic road marking machine with preheater?
A: Yes, we have. It is model TW-FJ, which is suitable for small line marking project. For more details,pls check home page.
3. Q: Can I adjust the line thickness? And how?
A: Yes, it could be adjusted by edging knife and hanger. The normal line thickness is 1.2-4 mm.
4. Q: How to mark lines in different width?
A:Change the marking hopper, change line width. We have varied sizes, from 50 mm to 450mm. Usually, the standard equipment is 150mm. The other size is optional. Also, we could produce special marking hopper for you.
5. Q: What about the after-sale service?
A: We are responsible to provide technical advise in the machine's whole shelf life. We help solving problems via whatsapp, skype,viber and email by sending pictures and videos.
6. Q: Could you produce customized machine?
A: Yes, we could. We are the manufacturer of thermoplastic road marking machine in Guangzhou City.
7. What about the shipment?
A: It is on your choice. Usually, we recommend sea shipping which provides reasonable prices. Also, for spare parts, it could be in FEDX, DHL and other international express.
If you have other questions, please feel free to contact us! We shall be glad to answer them.