Thermoplastic Paint Boiler
1.Name: Thermoplastic paint boiler 2.Application: Heat thermoplastic powder paints 3.Parameter: 4.Product details Thermoplastic paint boiler is the major equipment used for melting hot melt paint. It can be called hot melt kettle, thermoplastic paint preheater, which matched with thermoplastic...
1.Name: Thermoplastic paint boiler
2.Application: Heat thermoplastic powder paints
TW-YC:1620×1620×1400mm with stainless steel outer plate
Total weight of machine
Capacity ( melted paint)
TW-YC: 400kgX2(about 15-17 bags of paints each cylinder)
Diesel engine power
Engine start method
Helical blades can rotate leftwards and rightwards to move paints up and down.
Capacity of hydraulic oil tank
Thermoplastic paint boiler is the major equipment used for melting hot melt paint. It can be called hot melt kettle, thermoplastic paint preheater, which matched with thermoplastic road marking machine.double-tank hydraulic thermoplastic paints boiler.
●The diesel engine and the hydraulic kneader are placed horizontally to save place and convenient to do manual start.
●A water tank is set on the hydraulic oil tank to make gas fully used and protect the whole hydraulic systems.
●The multi-way reversing valve make paints heating fully.
●Electric starting diesel engine
16 HP diesel engine, easy to start, strong power, long life.
●Bottom of the Pot
8 mm thick high carbon alloy, heat transfer faster, greatly shorten the melting time; not easily to be deformed and will not be burned through within 5 years.
1.Q:Are you a factory or trading company?
A:We are factory which in this field for 10 years.
2.Q:Where is your factory located? How can I visit there?
A:Our factory is located in Guangzhou City, Guangdong Province, China, about 1 hour metro from Baiyun Airport . All our clients, from home or abroad, are warmly welcome to visit us!
3.Q:How to use thermoplastic paint boiler?
A: During the construction, put powder coating (additives) into the pre-heater firstly.
The heating temperature must be controlled between 180 °C ~ 210 °C.
Keep stirring while melting, until the paint into a homogeneous liquid state. And then, the hot-melt material is ready to be discharged into the thermoplastic machine for marking construction.
The melting paint quality affects directly to the traffic lines marking quality, so the pre-heater is a key part during thermoplastic paint road lines construction, and essential device for thermoplastic paints heating and melting
4.Q:How about package and delivery?
A:Export and sea-worthy is standard special packing for Self-propelled Marking Machine, within 7 days or according to your order quantity
Pls contact us by email: email@example.com or call us by 0086 13760883855, thank you.